123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546 |
- #
- # Makefile for meta-id - https://github.com/jeelabs/meta-id
- #
- # Makefile heavily adapted to meta-id and wireless flashing by Thorsten von Eicken
- # Lots of work, in particular to support windows, by brunnels
- # Original from esphttpd and others...
- #
- # Start by setting the directories for the toolchain a few lines down
- # the default target will build the firmware images
- # `make flash` will flash the esp serially
- # `make wiflash` will flash the esp over wifi
- # `VERBOSE=1 make ...` will print debug info
- # `ESP_HOSTNAME=my.esp.example.com make wiflash` is an easy way to override a variable
- # optional local configuration file
- -include local.conf
- # The Wifi station configuration can be hard-coded here, which makes meta-id come up in STA+AP
- # mode trying to connect to the specified AP *only* if the flash wireless settings are empty!
- # This happens on a full serial flash and avoids having to hunt for the AP...
- # STA_SSID ?=
- # STA_PASS ?=
- # The SOFTAP configuration can be hard-coded here, the minimum parameters to set are AP_SSID && AP_PASS
- # The AP SSID has to be at least 8 characters long, same for AP PASSWORD
- # The AP AUTH MODE can be set to:
- # 0 = AUTH_OPEN,
- # 1 = AUTH_WEP,
- # 2 = AUTH_WPA_PSK,
- # 3 = AUTH_WPA2_PSK,
- # 4 = AUTH_WPA_WPA2_PSK
- # SSID hidden default 0, ( 0 | 1 )
- # Max connections default 4, ( 1 ~ 4 )
- # Beacon interval default 100, ( 100 ~ 60000ms )
- #
- # AP_SSID ?=esp_link_test
- # AP_PASS ?=esp_link_test
- # AP_AUTH_MODE ?=4
- # AP_SSID_HIDDEN ?=0
- # AP_MAX_CONN ?=4
- # AP_BEACON_INTERVAL ?=100
- AP_SSID ?=.META_NNNN
- AP_PASS ?=
- AP_AUTH_MODE ?=0
- # If CHANGE_TO_STA is set to "yes" the meta-id module will switch to station mode
- # once successfully connected to an access point. Else it will stay in STA+AP mode.
- CHANGE_TO_STA ?= no
- # hostname or IP address for wifi flashing
- ESP_HOSTNAME ?= meta-id
- # --------------- toolchain configuration ---------------
- # Base directory for the compiler. Needs a / at the end.
- # Typically you'll install https://github.com/pfalcon/esp-open-sdk
- # IMPORTANT: use esp-open-sdk `make STANDALONE=n`: the SDK bundled with esp-open-sdk will *not* work!
- XTENSA_TOOLS_ROOT ?= $(abspath ../esp-open-sdk/xtensa-lx106-elf/bin)/
- # Firmware version
- # WARNING: if you change this expect to make code adjustments elsewhere, don't expect
- # that meta-id will magically work with a different version of the SDK!!!
- SDK_VERS ?= esp_iot_sdk_v2.1.0
- # Try to find the firmware manually extracted, e.g. after downloading from Espressif's BBS,
- # http://bbs.espressif.com/viewforum.php?f=46
- # USING THE SDK BUNDLED WITH ESP-OPEN-SDK WILL NOT WORK!!!
- SDK_BASE ?= $(wildcard ../$(SDK_VERS))
- # If the firmware isn't there, see whether it got downloaded as part of esp-open-sdk
- # This used to work at some point, but is not supported, uncomment if you feel lucky ;-)
- #ifeq ($(SDK_BASE),)
- #SDK_BASE := $(wildcard $(XTENSA_TOOLS_ROOT)/../../$(SDK_VERS))
- #endif
- # Clean up SDK path
- SDK_BASE := $(abspath $(SDK_BASE))
- $(info SDK is $(SDK_BASE))
- # Path to bootloader file
- BOOTFILE ?= $(SDK_BASE/bin/boot_v1.6.bin)
- # Esptool.py path and port, only used for 1-time serial flashing
- # Typically you'll use https://github.com/themadinventor/esptool
- # Windows users use the com port i.e: ESPPORT ?= com3
- ESPTOOL ?= $(abspath ../esp-open-sdk/esptool/esptool.py)
- ESPPORT ?= /dev/ttyUSB0
- ESPBAUD ?= 230400
- # --------------- chipset configuration ---------------
- # Pick your flash size: "512KB", "1MB", or "4MB"
- FLASH_SIZE ?= 4MB
- # The pin assignments below are used when the settings in flash are invalid, they
- # can be changed via the web interface
- # GPIO pin used to reset attached microcontroller, acative low
- MCU_RESET_PIN ?= 12
- # GPIO pin used with reset to reprogram MCU (ISP=in-system-programming, unused with AVRs), active low
- MCU_ISP_PIN ?= 13
- # GPIO pin used for "connectivity" LED, active low
- LED_CONN_PIN ?= 0
- # GPIO pin used for "serial activity" LED, active low
- LED_SERIAL_PIN ?= 14
- # --------------- meta-id modules config options ---------------
- # Optional Modules: mqtt rest socket web-server syslog
- MODULES ?= mqtt
- # --------------- esphttpd config options ---------------
- # If GZIP_COMPRESSION is set to "yes" then the static css, js, and html files will be compressed
- # with gzip before added to the espfs image and will be served with gzip Content-Encoding header.
- # This could speed up the downloading of these files, but might break compatibility with older
- # web browsers not supporting gzip encoding because Accept-Encoding is simply ignored.
- # Enable this option if you have large static files to serve (for e.g. JQuery, Twitter bootstrap)
- # If you have text based static files with different extensions what you want to serve compressed
- # then you will need to add the extension to the following places:
- # - Add the extension to this Makefile at the webpages.espfs target to the find command
- # - Add the extension to the gzippedFileTypes array in the user/httpd.c file
- #
- # Adding JPG or PNG files (and any other compressed formats) is not recommended, because GZIP
- # compression does not work effectively on compressed files.
- GZIP_COMPRESSION ?= yes
- # If COMPRESS_W_HTMLCOMPRESSOR is set to "yes" then the static css and js files will be compressed with
- # htmlcompressor and yui-compressor. This option works only when GZIP_COMPRESSION is set to "yes".
- # https://code.google.com/p/htmlcompressor/#For_Non-Java_Projects
- # http://yui.github.io/yuicompressor/
- # enabled by default.
- COMPRESS_W_HTMLCOMPRESSOR ?= yes
- HTML_COMPRESSOR ?= htmlcompressor-1.5.3.jar
- YUI_COMPRESSOR ?= yuicompressor-2.4.8.jar
- # -------------- End of config options -------------
- HTML_PATH = $(abspath ./html)/
- WIFI_PATH = $(HTML_PATH)wifi/
- TEXT_PATH = $(HTML_PATH)text/
- FONT_PATH = $(HTML_PATH)fonts/
- ESP_FLASH_MAX ?= 503808 # max bin file
- ifeq ("$(FLASH_SIZE)","512KB")
- # Winbond 25Q40 512KB flash, typ for esp-01 thru esp-11
- ESP_SPI_SIZE ?= 0 # 0->512KB (256KB+256KB)
- ESP_FLASH_MODE ?= 0 # 0->QIO
- ESP_FLASH_FREQ_DIV ?= 0 # 0->40Mhz
- ET_FS ?= 4m # 4Mbit flash size in esptool flash command
- ET_FF ?= 40m # 40Mhz flash speed in esptool flash command
- ET_INIT_DATA ?= 0x7C000 # where to flash esp_init_data_default.bin
- ET_BLANK ?= 0x7E000 # where to flash blank.bin to erase wireless settings
- else ifeq ("$(FLASH_SIZE)","1MB")
- # ESP-01E
- ESP_SPI_SIZE ?= 2 # 2->1MB (512KB+512KB)
- ESP_FLASH_MODE ?= 0 # 0->QIO
- ESP_FLASH_FREQ_DIV ?= 15 # 15->80MHz
- ET_FS ?= 8m # 8Mbit flash size in esptool flash command
- ET_FF ?= 80m # 80Mhz flash speed in esptool flash command
- ET_INIT_DATA ?= 0xFC000 # where to flash esp_init_data_default.bin
- ET_BLANK ?= 0xFE000 # where to flash blank.bin to erase wireless settings
- else ifeq ("$(FLASH_SIZE)","2MB")
- # Manuf 0xA1 Chip 0x4015 found on wroom-02 modules
- # Here we're using two partitions of approx 0.5MB because that's what's easily available in terms
- # of linker scripts in the SDK. Ideally we'd use two partitions of approx 1MB, the remaining 2MB
- # cannot be used for code (esp8266 limitation).
- ESP_SPI_SIZE ?= 4 # 6->4MB (1MB+1MB) or 4->4MB (512KB+512KB)
- ESP_FLASH_MODE ?= 0 # 0->QIO, 2->DIO
- ESP_FLASH_FREQ_DIV ?= 15 # 15->80Mhz
- :q
- ET_FS ?= 16m # 16Mbit flash size in esptool flash command
- ET_FF ?= 80m # 80Mhz flash speed in esptool flash command
- ET_INIT_DATA ?= 0x1FC000 # where to flash esp_init_data_default.bin
- ET_BLANK ?= 0x1FE000 # where to flash blank.bin to erase wireless settings
- else
- # Winbond 25Q32 4MB flash, typ for esp-12
- # Here we're using two partitions of approx 0.5MB because that's what's easily available in terms
- # of linker scripts in the SDK. Ideally we'd use two partitions of approx 1MB, the remaining 2MB
- # cannot be used for code (esp8266 limitation).
- ESP_SPI_SIZE ?= 4 # 6->4MB (1MB+1MB) or 4->4MB (512KB+512KB)
- ESP_FLASH_MODE ?= 0 # 0->QIO, 2->DIO
- ESP_FLASH_FREQ_DIV ?= 15 # 15->80Mhz
- ET_FS ?= 32m # 32Mbit flash size in esptool flash command
- ET_FF ?= 80m # 80Mhz flash speed in esptool flash command
- ET_INIT_DATA ?= 0x3FC000 # where to flash esp_init_data_default.bin
- ET_BLANK ?= 0x3FE000 # where to flash blank.bin to erase wireless settings
- endif
- # --------------- meta-id version ---------------
- # Version-fu :-) This code assumes that a new maj.minor is started using a "vN.M.0" tag on master
- # and that thereafter the desired patchlevel number is just the number of commits since the tag.
- #
- # Get the current branch name if not using travis
- TRAVIS_BRANCH?=$(shell git symbolic-ref --short HEAD --quiet)
- # Use git describe to get the latest version tag, commits since then, sha and dirty flag, this
- # results is something like "v1.2.0-13-ab6cedf-dirty"
- NO_TAG ?= "no-tag"
- VERSION := $(shell (git describe --tags --match 'v*.0' --long --dirty || echo $(NO_TAG)) | sed -re 's/(\.0)?-/./')
- # If not on master then insert the branch name
- ifneq ($(TRAVIS_BRANCH),master)
- ifneq ($(findstring V%,$(TRAVIS_BRANCH)),)
- VERSION := $(shell echo $(VERSION) | sed -e 's/-/-$(TRAVIS_BRANCH)-/')
- endif
- endif
- VERSION :=$(VERSION)
- $(info VERSION is $(VERSION))
- # Output directors to store intermediate compiled files
- # relative to the project directory
- BUILD_BASE = build
- FW_BASE = firmware
- # name for the target project
- TARGET = httpd
- # espressif tool to concatenate sections for OTA upload using bootloader v1.2+
- APPGEN_TOOL ?= gen_appbin.py
- CFLAGS=
- # set defines for optional modules
- ifneq (,$(findstring mqtt,$(MODULES)))
- CFLAGS += -DMQTT
- endif
- ifneq (,$(findstring rest,$(MODULES)))
- CFLAGS += -DREST
- endif
- ifneq (,$(findstring syslog,$(MODULES)))
- CFLAGS += -DSYSLOG
- endif
- ifneq (,$(findstring web-server,$(MODULES)))
- CFLAGS += -DWEBSERVER
- endif
- ifneq (,$(findstring socket,$(MODULES)))
- CFLAGS += -DSOCKET
- endif
- # flag to disable espconn_secure functions
- CFLAGS += -DNOSSL
- # which modules (subdirectories) of the project to include in compiling
- LIBRARIES_DIR = libraries
- MODULES += espfs httpd cmd serial meta-id user
- MODULES += $(foreach sdir,$(LIBRARIES_DIR),$(wildcard $(sdir)/*))
- EXTRA_INCDIR = include .
- # libraries used in this project, mainly provided by the SDK
- LIBS = c gcc hal phy pp net80211 wpa main lwip_536 crypto pwm
- # compiler flags using during compilation of source files
- CFLAGS += -Os -std=c99 -Werror -Wpointer-arith -Wundef -Wall -Wl,-EL -fno-inline-functions \
- -nostdlib -mlongcalls -mtext-section-literals -ffunction-sections -fdata-sections \
- -D__ets__ -DICACHE_FLASH -Wno-address -DFIRMWARE_SIZE=$(ESP_FLASH_MAX) \
- -DMCU_RESET_PIN=$(MCU_RESET_PIN) -DMCU_ISP_PIN=$(MCU_ISP_PIN) \
- -DLED_CONN_PIN=$(LED_CONN_PIN) -DLED_SERIAL_PIN=$(LED_SERIAL_PIN) \
- -DVERSION="meta-id $(VERSION)"
- # linker flags used to generate the main object file
- LDFLAGS = -nostdlib -Wl,--no-check-sections -u call_user_start -Wl,-static -Wl,--gc-sections
- # linker script used for the above linker step
- LD_SCRIPT := build/eagle.esphttpd.v6.ld
- LD_SCRIPT1 := build/eagle.esphttpd1.v6.ld
- LD_SCRIPT2 := build/eagle.esphttpd2.v6.ld
- # various paths from the SDK used in this project
- SDK_LIBDIR = lib
- SDK_LDDIR = ld
- SDK_INCDIR = include include/json
- SDK_TOOLSDIR = tools
- # select which tools to use as compiler, librarian and linker
- CC := $(XTENSA_TOOLS_ROOT)xtensa-lx106-elf-gcc
- AR := $(XTENSA_TOOLS_ROOT)xtensa-lx106-elf-ar
- LD := $(XTENSA_TOOLS_ROOT)xtensa-lx106-elf-gcc
- OBJCP := $(XTENSA_TOOLS_ROOT)xtensa-lx106-elf-objcopy
- OBJDP := $(XTENSA_TOOLS_ROOT)xtensa-lx106-elf-objdump
- ELF_SIZE := $(XTENSA_TOOLS_ROOT)xtensa-lx106-elf-size
- ####
- SRC_DIR := $(MODULES)
- BUILD_DIR := $(addprefix $(BUILD_BASE)/,$(MODULES))
- SDK_LIBDIR := $(addprefix $(SDK_BASE)/,$(SDK_LIBDIR))
- SDK_LDDIR := $(addprefix $(SDK_BASE)/,$(SDK_LDDIR))
- SDK_INCDIR := $(addprefix -I$(SDK_BASE)/,$(SDK_INCDIR))
- SDK_TOOLS := $(addprefix $(SDK_BASE)/,$(SDK_TOOLSDIR))
- APPGEN_TOOL := $(addprefix $(SDK_TOOLS)/,$(APPGEN_TOOL))
- SRC := $(foreach sdir,$(SRC_DIR),$(wildcard $(sdir)/*.c))
- OBJ := $(patsubst %.c,$(BUILD_BASE)/%.o,$(SRC)) $(BUILD_BASE)/espfs_img.o
- LIBS := $(addprefix -l,$(LIBS))
- APP_AR := $(addprefix $(BUILD_BASE)/,$(TARGET)_app.a)
- USER1_OUT := $(addprefix $(BUILD_BASE)/,$(TARGET).user1.out)
- USER2_OUT := $(addprefix $(BUILD_BASE)/,$(TARGET).user2.out)
- INCDIR := $(addprefix -I,$(SRC_DIR))
- EXTRA_INCDIR := $(addprefix -I,$(EXTRA_INCDIR))
- MODULE_INCDIR := $(addsuffix /include,$(INCDIR))
- V ?= $(VERBOSE)
- ifeq ("$(V)","1")
- Q :=
- vecho := @true
- else
- Q := @
- vecho := @echo
- endif
- ifneq ($(strip $(STA_SSID)),)
- CFLAGS += -DSTA_SSID="$(STA_SSID)"
- endif
- ifneq ($(strip $(STA_PASS)),)
- CFLAGS += -DSTA_PASS="$(STA_PASS)"
- endif
- ifneq ($(strip $(AP_SSID)),)
- CFLAGS += -DAP_SSID="$(AP_SSID)"
- endif
- ifneq ($(strip $(AP_PASS)),)
- CFLAGS += -DAP_PASS="$(AP_PASS)"
- endif
- ifneq ($(strip $(AP_AUTH_MODE)),)
- CFLAGS += -DAP_AUTH_MODE="$(AP_AUTH_MODE)"
- endif
- ifneq ($(strip $(AP_SSID_HIDDEN)),)
- CFLAGS += -DAP_SSID_HIDDEN="$(AP_SSID_HIDDEN)"
- endif
- ifneq ($(strip $(AP_MAX_CONN)),)
- CFLAGS += -DAP_MAX_CONN="$(AP_MAX_CONN)"
- endif
- ifneq ($(strip $(AP_BEACON_INTERVAL)),)
- CFLAGS += -DAP_BEACON_INTERVAL="$(AP_BEACON_INTERVAL)"
- endif
- ifeq ("$(GZIP_COMPRESSION)","yes")
- CFLAGS += -DGZIP_COMPRESSION
- endif
- ifeq ("$(CHANGE_TO_STA)","yes")
- CFLAGS += -DCHANGE_TO_STA
- endif
- vpath %.c $(SRC_DIR)
- define compile-objects
- $1/%.o: %.c
- $(vecho) "CC $$<"
- $(Q)$(CC) $(INCDIR) $(MODULE_INCDIR) $(EXTRA_INCDIR) $(SDK_INCDIR) $(CFLAGS) -c $$< -o $$@
- endef
- .PHONY: all checkdirs clean webpages.espfs wiflash
- all: checkdirs $(FW_BASE)/user1.bin $(FW_BASE)/user2.bin
- $(USER1_OUT): $(APP_AR) $(LD_SCRIPT1)
- $(vecho) "LD $@"
- $(Q) $(LD) -L$(SDK_LIBDIR) -T$(LD_SCRIPT1) $(LDFLAGS) -Wl,--start-group $(LIBS) $(APP_AR) -Wl,--end-group -o $@
- @echo Dump : $(OBJDP) -x $(USER1_OUT)
- @echo Disass: $(OBJDP) -d -l -x $(USER1_OUT)
- # $(Q) $(OBJDP) -x $(TARGET_OUT) | egrep espfs_img
- $(USER2_OUT): $(APP_AR) $(LD_SCRIPT2)
- $(vecho) "LD $@"
- $(Q) $(LD) -L$(SDK_LIBDIR) -T$(LD_SCRIPT2) $(LDFLAGS) -Wl,--start-group $(LIBS) $(APP_AR) -Wl,--end-group -o $@
- # $(Q) $(OBJDP) -x $(TARGET_OUT) | egrep espfs_img
- $(FW_BASE):
- $(vecho) "FW $@"
- $(Q) mkdir -p $@
- $(FW_BASE)/user1.bin: $(USER1_OUT) $(FW_BASE)
- $(Q) $(OBJCP) --only-section .text -O binary $(USER1_OUT) eagle.app.v6.text.bin
- $(Q) $(OBJCP) --only-section .data -O binary $(USER1_OUT) eagle.app.v6.data.bin
- $(Q) $(OBJCP) --only-section .rodata -O binary $(USER1_OUT) eagle.app.v6.rodata.bin
- $(Q) $(OBJCP) --only-section .irom0.text -O binary $(USER1_OUT) eagle.app.v6.irom0text.bin
- $(Q) $(ELF_SIZE) -A $(USER1_OUT) |grep -v " 0$$" |grep .
- $(Q) COMPILE=gcc PATH=$(XTENSA_TOOLS_ROOT):$(PATH) python2 $(APPGEN_TOOL) $(USER1_OUT) 2 $(ESP_FLASH_MODE) $(ESP_FLASH_FREQ_DIV) $(ESP_SPI_SIZE) 0 >/dev/null
- $(Q) rm -f eagle.app.v6.*.bin
- $(Q) mv eagle.app.flash.bin $@
- @echo " user1.bin uses $$(stat -c '%s' $@) bytes of" $(ESP_FLASH_MAX) "available"
- $(Q) if [ $$(stat -c '%s' $@) -gt $$(( $(ESP_FLASH_MAX) )) ]; then echo "$@ too big!"; false; fi
- $(FW_BASE)/user2.bin: $(USER2_OUT) $(FW_BASE)
- $(Q) $(OBJCP) --only-section .text -O binary $(USER2_OUT) eagle.app.v6.text.bin
- $(Q) $(OBJCP) --only-section .data -O binary $(USER2_OUT) eagle.app.v6.data.bin
- $(Q) $(OBJCP) --only-section .rodata -O binary $(USER2_OUT) eagle.app.v6.rodata.bin
- $(Q) $(OBJCP) --only-section .irom0.text -O binary $(USER2_OUT) eagle.app.v6.irom0text.bin
- $(Q) COMPILE=gcc PATH=$(XTENSA_TOOLS_ROOT):$(PATH) python2 $(APPGEN_TOOL) $(USER2_OUT) 2 $(ESP_FLASH_MODE) $(ESP_FLASH_FREQ_DIV) $(ESP_SPI_SIZE) 1 >/dev/null
- $(Q) rm -f eagle.app.v6.*.bin
- $(Q) mv eagle.app.flash.bin $@
- $(Q) if [ $$(stat -c '%s' $@) -gt $$(( $(ESP_FLASH_MAX) )) ]; then echo "$@ too big!"; false; fi
- $(APP_AR): $(OBJ)
- $(vecho) "AR $@"
- $(Q) $(AR) cru $@ $^
- checkdirs: $(BUILD_DIR)
- $(BUILD_DIR):
- $(Q) mkdir -p $@
- wiflash: all
- ./wiflash $(ESP_HOSTNAME) $(FW_BASE)/user1.bin $(FW_BASE)/user2.bin
- baseflash: all
- $(Q) $(ESPTOOL) --port $(ESPPORT) --baud $(ESPBAUD) write_flash 0x01000 $(FW_BASE)/user1.bin
- flash: all
- $(Q) $(ESPTOOL) --port $(ESPPORT) --baud $(ESPBAUD) write_flash -fs $(ET_FS) -ff $(ET_FF) \
- 0x00000 "$(SDK_BASE)/bin/boot_v1.6.bin" 0x01000 $(FW_BASE)/user1.bin \
- $(ET_BLANK) $(SDK_BASE)/bin/blank.bin
- fullflash: all
- $(Q) $(ESPTOOL) --port $(ESPPORT) --baud $(ESPBAUD) write_flash -fs $(ET_FS) -ff $(ET_FF) \
- 0x00000 "$(SDK_BASE)/bin/boot_v1.6.bin" 0x01000 $(FW_BASE)/user1.bin \
- $(ET_INIT_DATA) $(SDK_BASE)/bin/esp_init_data_default.bin $(ET_BLANK) $(SDK_BASE)/bin/blank.bin
- tools/$(HTML_COMPRESSOR):
- $(Q) echo "The jar files in the tools dir are missing, they should be in the source repo"
- $(Q) echo "The following commands can be used to fetch them, but the URLs have changed..."
- $(Q) echo mkdir -p tools
- $(Q) echo "cd tools; wget --no-check-certificate https://github.com/yui/yuicompressor/releases/download/v2.4.8/$(YUI_COMPRESSOR) -O $(YUI_COMPRESSOR)"
- $(Q) echo "cd tools; wget --no-check-certificate https://htmlcompressor.googlecode.com/files/$(HTML_COMPRESSOR) -O $(HTML_COMPRESSOR)"
- ifeq ("$(COMPRESS_W_HTMLCOMPRESSOR)","yes")
- $(BUILD_BASE)/espfs_img.o: tools/$(HTML_COMPRESSOR)
- endif
- $(BUILD_BASE)/espfs_img.o: html/ html/wifi/ html/text/ espfs/mkespfsimage/mkespfsimage
- # $(Q) rm -rf html_compressed; mkdir html_compressed; mkdir html_compressed/wifi; mkdir html_compressed/text;mkdir html_compressed/fonts;
- $(Q) rm -rf html_compressed; mkdir html_compressed; mkdir html_compressed/fonts;
- $(Q) cp -r html/*.ico html_compressed;
- $(Q) cp -r html/*.css html_compressed;
- $(Q) cp -r html/*.js html_compressed;
- # $(Q) cp -r html/wifi/*.js html_compressed/wifi;
- $(Q) cp -r html/Lato-Embed.ttf html_compressed/fonts;
- ifeq ("$(COMPRESS_W_HTMLCOMPRESSOR)","yes")
- $(Q) echo "Compressing assets with htmlcompressor. This may take a while..."
- $(Q) java -jar tools/$(HTML_COMPRESSOR) \
- -t html --remove-surrounding-spaces max --remove-quotes --remove-intertag-spaces \
- -o $(abspath ./html_compressed)/ \
- $(HTML_PATH)head- \
- $(HTML_PATH)*.html
- # $(Q) java -jar tools/$(HTML_COMPRESSOR) \
- # -t html --remove-surrounding-spaces max --remove-quotes --remove-intertag-spaces \
- # -o $(abspath ./html_compressed)/text/ \
- # $(TEXT_PATH)*.html
- # $(Q) java -jar tools/$(HTML_COMPRESSOR) \
- # -t html --remove-surrounding-spaces max --remove-quotes --remove-intertag-spaces \
- # -o $(abspath ./html_compressed)/wifi/ \
- # $(WIFI_PATH)*.html
- $(Q) echo "Compressing assets with yui-compressor. This may take a while..."
- $(Q) for file in `find html_compressed -type f -name "*.js"`; do \
- java -jar tools/$(YUI_COMPRESSOR) $$file --line-break 0 -o $$file; \
- done
- $(Q) for file in `find html_compressed -type f -name "*.css"`; do \
- java -jar tools/$(YUI_COMPRESSOR) $$file -o $$file; \
- done
- else
- $(Q) cp -r html/head- html_compressed;
- $(Q) cp -r html/*.html html_compressed;
- $(Q) cp -r html/text/*.html html_compressed/text;
- # $(Q) cp -r html/wifi/*.html html_compressed/wifi;
- endif
- ifeq (,$(findstring mqtt,$(MODULES)))
- $(Q) rm -rf html_compressed/mqtt.html
- $(Q) rm -rf html_compressed/mqtt.js
- endif
- $(Q) for file in `find html_compressed -type f -name "*.htm*"`; do \
- cat html_compressed/head- $$file >$${file}-; \
- mv $$file- $$file; \
- done
- $(Q) rm html_compressed/head-
- $(Q) cd html_compressed; find . \! -name \*- | ../espfs/mkespfsimage/mkespfsimage > ../build/espfs.img; cd ..;
- $(Q) ls -sl build/espfs.img
- $(Q) cd build; $(OBJCP) -I binary -O elf32-xtensa-le -B xtensa --rename-section .data=.espfs \
- espfs.img espfs_img.o; cd ..
- # edit the loader script to add the espfs section to the end of irom with a 4 byte alignment.
- # we also adjust the sizes of the segments 'cause we need more irom0
- build/eagle.esphttpd1.v6.ld: $(SDK_LDDIR)/eagle.app.v6.new.1024.app1.ld
- $(Q) sed -e '/\.irom\.text/{' -e 'a . = ALIGN (4);' -e 'a *(.espfs)' -e '}' \
- -e '/^ irom0_0_seg/ s/6B000/7C000/' \
- $(SDK_LDDIR)/eagle.app.v6.new.1024.app1.ld >$@
- build/eagle.esphttpd2.v6.ld: $(SDK_LDDIR)/eagle.app.v6.new.1024.app2.ld
- $(Q) sed -e '/\.irom\.text/{' -e 'a . = ALIGN (4);' -e 'a *(.espfs)' -e '}' \
- -e '/^ irom0_0_seg/ s/6B000/7C000/' \
- $(SDK_LDDIR)/eagle.app.v6.new.1024.app2.ld >$@
- espfs/mkespfsimage/mkespfsimage: espfs/mkespfsimage/
- $(Q) $(MAKE) -C espfs/mkespfsimage GZIP_COMPRESSION="$(GZIP_COMPRESSION)"
- release: all
- $(Q) rm -rf release; mkdir -p release/meta-id-$(VERSION)
- $(Q) egrep -a 'meta-id [a-z0-9.]+ - 201' $(FW_BASE)/user1.bin | cut -b 1-80
- $(Q) egrep -a 'meta-id [a-z0-9.]+ - 201' $(FW_BASE)/user2.bin | cut -b 1-80
- $(Q) cp $(FW_BASE)/user1.bin $(FW_BASE)/user2.bin $(SDK_BASE)/bin/blank.bin \
- "$(SDK_BASE)/bin/boot_v1.7.bin" "$(SDK_BASE)/bin/esp_init_data_default.bin" \
- wiflash avrflash megaflash release/meta-id-$(VERSION)
- $(Q) tar zcf meta-id-$(VERSION).tgz -C release meta-id-$(VERSION)
- $(Q) echo "Release file: meta-id-$(VERSION).tgz"
- $(Q) rm -rf release
- docker:
- $(Q) docker build -t jeelabs/meta-id .
- clean:
- $(Q) rm -f $(APP_AR)
- $(Q) rm -f $(TARGET_OUT)
- $(Q) find $(BUILD_BASE) -type f | xargs rm -f
- $(Q) make -C espfs/mkespfsimage/ clean
- $(Q) rm -rf $(FW_BASE)
- $(Q) rm -f webpages.espfs
- ifeq ("$(COMPRESS_W_HTMLCOMPRESSOR)","yes")
- $(Q) rm -rf html_compressed
- endif
- $(foreach bdir,$(BUILD_DIR),$(eval $(call compile-objects,$(bdir))))
- depend:
- makedepend -p${BUILD_BASE}/ -Y -- $(INCDIR) $(MODULE_INCDIR) $(EXTRA_INCDIR) $(SDK_INCDIR) -I${XTENSA_TOOLS_ROOT}../xtensa-lx106-elf/include -I${XTENSA_TOOLS_ROOT}../lib/gcc/xtensa-lx106-elf/4.8.2/include -- */*.c
- # Rebuild version at least at every Makefile change
- ${BUILD_BASE}/meta-id/main.o: Makefile
- # DO NOT DELETE
|